Results 1 to 20 of 231
Hybrid View
-
01-31-2010 #1
-
01-31-2010 #2Finally got the main tub in Epoxy then followed that up with 2 coats of high build. Things should progress quickly now and I will be looking for a decent weather day in the next few weeks to lay the color and clear. Does not have to be 60 just not 18 as my heater can only compensate for so much with the amount of air the booth moves.
I will now block everything with 180 grit followed with another coat of high build, then 220 and more primer ,then 320. Once I have it at that stage I will reduce some Epoxy by 10% or so and shoot a nice wet sealer coat. That will get wet sanded with 600 then the base can go on.
Brian Finch
Pro-touring Hero
The Proof is on the Pavement
Sponsored by Baer Brakes, JRI Shocks, Pennzoil, Tremec, Magnaflow, Centerforce, AFCO Racing, Kurt Urban Performance, Amercian Powertrain, Forgeline, Holley, and of course BFG.
For the best engine money can buy please visit http://www.kurturbanperformance.com/
Authorized dealer for Baer, Ridetech, Detroit Speed, Vintage Air, Motorstate Distributing, Wilwood Engineering, American Autowire, Forgeline, Holley, Afco,
Contact brian@finchperformance for special Pro-Touring.com member pricing
www.hotrodtransformations.com






Reply With Quote




