Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 19 of 19

    Hybrid View

    1. #1
      Join Date
      Feb 2007
      Location
      Vancouver, WA
      Posts
      183
      Hey Tobin - Have you seen this item from SSBC? Looks to be a replacement for the stock prop block with a provision for the brake light on the dash as well as adjustable valve for the rears. Looks pretty cool. Scroll down to page 43. http://www.ssbrakes.com/content/imag..._web_small.pdf



    2. #2
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Quote Originally Posted by gort69 View Post
      Hey Tobin - Have you seen this item from SSBC? Looks to be a replacement for the stock prop block with a provision for the brake light on the dash as well as adjustable valve for the rears. Looks pretty cool. Scroll down to page 43. http://www.ssbrakes.com/content/imag..._web_small.pdf
      I have seen that and it's a slick little combination valve for the money. Some think it's a bit overpriced, but for what it contains it seems like a pretty good deal to me if you wanted to maintain a more factory plumbing scheme and dummy light functionality. Summit offers the same thing for a few bucks less (SUM-G3910) so it's probably just brand labeled from someone else, maybe SSBC, maybe not.

      73X, if your '73 Nova is like ours was (drum/drum), then it doesn't have any proportioning valve, just a distribution block with a brake balance switch, so there's nothing to gut. As for master cylinders, I'd probably start with the 1" bore 67-76 C3 Corvette disc/disc or the 15/16" equivalent that CPP sells. Just make sure that you match the pushrod length on the booster with the depth of the pushrod hole in the MC piston...I believe the Nova was a long pushrod booster, but don't quote me on that as ours was manual.

      Tobin
      KORE3
      It's what I does.

    3. #3
      Join Date
      Nov 2009
      Location
      Fort Walton Beach, FL
      Posts
      44
      Quote Originally Posted by Apogee View Post
      73X, if your '73 Nova is like ours was (drum/drum), then it doesn't have any proportioning valve, just a distribution block with a brake balance switch, so there's nothing to gut. As for master cylinders, I'd probably start with the 1" bore 67-76 C3 Corvette disc/disc or the 15/16" equivalent that CPP sells. Just make sure that you match the pushrod length on the booster with the depth of the pushrod hole in the MC piston...I believe the Nova was a long pushrod booster, but don't quote me on that as ours was manual.

      Tobin
      KORE3
      My car is a factory disc/drum car with vaccuum assist. Should I just try to find a drum brake car distribution block?
      Thanks
      Kevin
      73 Nova
      355/TH350 (soon to be T56)
      07 Trailblazer SS AWD
      Stock (for now)

    4. #4
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      Quote Originally Posted by 73X View Post
      My car is a factory disc/drum car with vaccuum assist. Should I just try to find a drum brake car distribution block?
      Thanks
      You can, although it's not necessary, it just depends on what you prefer and how comfortable you are making your own brake lines. By using a factory distribution block or combination valve, you can use your factory hard lines and/or aftermarket replacements without too much hassle.

      If you decide to replumb the car yourself, you don't need the distribution block unless you want to maintain the brake balance switch. If not, you can just run a Tee fitting to split the front line and go direct from the MC to the rear center hose with an adjustable proportioning valve in between.

      Tobin
      KORE3
      It's what I does.




    Advertise on Pro-Touring.com