Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 19 of 19

    Threaded View

    1. #6
      Join Date
      Jan 2006
      Location
      Oregon
      Posts
      1,773
      Country Flag: United States
      The '73 and '74 X-bodies are basically the same as the '68-'72 X-bodies with respect to the running gear, so they still use what we refer to as the modular GM short-spindle up front with the bolt-on steering arms and caliper brackets. The left and right hand spindles are the same part. Whether you have disc or drum spindles doesn't matter as you should be able to get brackets for either...ours are the same brackets and just differ in the mounting hardware that we supply with them.



      As for master cylinders, neither your factory 1" (manual) or 1-1/8" (power) units will be optimal with a C5 or LS1 type of setup for the effective piston area differences mentioned above. Ideally, you'd go disc/disc at the same time as that tends to simplify your plumbing and MC requirements in the long run. It also helps to know what your primary uses are for the vehicle in question as we usually wouldn't set up a daily-driver the same way as a dedicated track car.

      Doing things in stages can simplify things in some ways, particularly troubleshooting IMO since you're usually only changing one thing at a time, but can complicate them in others. Most people don't like buying parts twice or replumbing their brakes numerous times for MC changes, inline residual pressure valves, adjustable proportioning valves and the like. That said, we've got plenty of customers happily running C5/C6 front discs with factory drums in the rear since that's what their budgets allowed at the time...many have upgraded later while others have stuck with the disc/drum setups with good results.

      Tobin
      KORE3
      It's what I does.





    Advertise on Pro-Touring.com