Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8
    1. #1
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States

      II Much clutch pics

      I've been working with the guys at Quarter Master on a clutch for my project. They specialize in lightweight, yet strong driveline components. Given the car's weight (about 3000 lbs), hp level (hopefully my 427 LS2 will make in excess of 650 hp), QM came up with a brand new clutch.



      It's a dual disc, 8.5" diameter setup. They sell lots of 5.5" or 7.25" clutches for racing use, so the 8.5 is a little different for them. It has organic material, and a sprung hub to make it less "binary". The flywheel is scalloped on the back to reduce weight. The whole setup weighs in at just under 30 lbs. Check out how the inner hub connects the two discs together. It's a much better design than having both discs spline onto the tranny input shaft (which can result in a twisted input shaft between the clutch plates).

      jp
      Last edited by parsonsj; 06-07-2008 at 09:24 PM.
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro


    2. #2
      Join Date
      Dec 2004
      Location
      connecticut
      Posts
      243
      sweet set up . what did that cost?.

    3. #3
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Hey quad. Yes, QM makes some very trick parts.

      I'm not sure how much they'll want for one. Their racing versions (5.5, 7.25) go for around $800.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    4. #4
      Join Date
      Dec 2004
      Location
      connecticut
      Posts
      243
      that sounds resonable for a peice like that one. let us know when you find out. thanks

    5. #5
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      The dual disk 8.5 will run probably more in the 1200-1300 range, with the billet flywheel.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    6. #6
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Yeah, I guess the racing prices I looked at didn't include the flywheel.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    7. #7
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      Is that clutch design for all their clutches or just that particular one? I am still up in the air on a clutch for my LT-1 w/ ZF-6 speed. I don't need to radical of a setup but better than stock. I have been looking at Centerforce DF clutches and McLeod but can't make up my mind.

      Mike
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    8. #8
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      Mike,
      I believe the spline drive for the discs is unique to this clutch.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro




    Advertise on Pro-Touring.com