Results 1 to 10 of 10
Thread: Interior upgrade
Hybrid View
-
10-02-2009 #1
Registered User
- Join Date
- Dec 2002
- Location
- Wichita Falls TX
- Posts
- 369
Tony, yes I used the floor mount cable version. It is the 6" shifter.
-
10-02-2009 #2
Registered User
- Join Date
- Sep 2006
- Location
- Chicago
- Posts
- 355
Thanks
Tony L
10-07-2009 #3
Registered User
- Join Date
- May 2005
- Posts
- 394
Looks good!
Are you smellin what I'm steppin in?
http://www.fquick.com/ertoys
10-15-2009 #4
Registered User
- Join Date
- Aug 2009
- Location
- Napa, Ca.
- Posts
- 190
Interior questions...
Hi Scott...nice work on your 69. I love the interior...a couple of questions for you if you dont mind...on the 4th gen seats, are they plug and play? I noticed you said you cut about 4 inches out of them. Is that off the top or the sides. Also, did you have the seats custom upholstered or did you get the 4th gen houndstooth seat covers from PUI? I have the white deluxe houndstooth in my 69 and have been thinking of doing the 4th gen swap and found out that PUI offers matching 69 houndstooth 4th gen seat covers like Year One used in thier build. Thanks! Jeff
10-15-2009 #5
Registered User
- Join Date
- Dec 2002
- Location
- Wichita Falls TX
- Posts
- 369
Jeff...Thanks, the front bolts on the seats line up with the stock holes. Had to cut the tabs off the rear of the seats and re weld on to line up with rear holes. The 4 inches was cut out of the top of the seats. As for the material, I bought just the houndstooth material and had the seats sewn up. If you don't cut the seats down the PUI covers will fit nicely.
Reply With Quote
