Results 1 to 10 of 10
Thread: Interior upgrade
Hybrid View
-
10-15-2009 #1
Registered User
- Join Date
- Dec 2002
- Location
- Wichita Falls TX
- Posts
- 369
Jeff...Thanks, the front bolts on the seats line up with the stock holes. Had to cut the tabs off the rear of the seats and re weld on to line up with rear holes. The 4 inches was cut out of the top of the seats. As for the material, I bought just the houndstooth material and had the seats sewn up. If you don't cut the seats down the PUI covers will fit nicely.
-
Reply With Quote
