Results 1 to 2 of 2
Thread: EFI Plumbing Questions
-
03-31-2005 #1
Registered User
- Join Date
- Aug 2004
- Location
- Austin, in the great Nation of Texas
- Posts
- 48
EFI Plumbing Questions
I'm putting a Stealth Ram in my '68 RS and have already installed new steel hard lines from the back of the car to the front. The fuel rails are -6 on both supply and return. Here's my question -
I've used 3/8" hard line for the supply and 5/16" for the return. I know I can get a hard line adapter to go from 3/8" to AN so that's easy. What about the 5/16" line. I've not found an adapter to do that. Have I snookered myself by using 5/16" return line? Any suggestions?
Also, can ya'll recommend a good source for the required AN fittings?
-
03-31-2005 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Give these guys a call:
http://www.performanceplumbing.com/Pure_Choice.shtml
If I remember correctly I bought a 5/16th to -6 compression adapter from them.
Its not shown on the website, so give them a call.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
