Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by wmhjr View Post
      Jim, my understanding is that 9:1 cast iron heads replaced with similar aluminum requires 10:1. Aluminum needs more heat to make the same power. Flow means something, but not everything (at all). I'd guess in your build velocity is more important, as is the port design. In any case, without sufficient heat you may be unhappy. Aluminum needs heat. Low cylinder compression with a good cam and aluminum heads may well lead to a loss of power without any reliability gain. I would personally never run less than 10:1 compression with decent aluminum heads.

      I can sure understand you being a bit shy right now after just having a motor grenade on you, but to me it's LOTS easier to make a good estimate of static compression, build the heads/slugs that way, and try it. You'll quickly know. If you decide you want to then reduce compression, it's way easier to pull the heads, send them to a good shop to have a few cc's milled out of the chambers and you're done. If you start with too low compression, it's a far more difficult process.
      Very good point about taking out material to lower the compression. I can actually port them and cc them myself if it came to that and get the benefit of removing the right amount in the right places. I will talk to him about that option, milling them can bring it up but hat does require making the manifold fit and clearances.

      Monday will be the day we decide on the heads and then he said we could decide on the lower end.

      I am getting better about tearing into the engine and drivetrain and find it is a fairly easy car to work on once you get it down and have all the tools lined up. It is both metric and standard all over the place.

      I now have certain rituals with raising and lowering the car and sure could use your lift .

      I figured out how to fix my fuel problem and have to get the materials and the fittings together. I should be able to always have fuel at any amount over half full and then it will be up to the reseviour containment area and the return supply volume. Anything would be better than what was.

      I am confident the builder understands what my abilities are but I might need to enlighten him? I like the idea of being able to cc the heads and not have to deck them to be the right compression.

      I can also take out iming at the touch of finger so that isn't an issue it would seem. I have to talk to him to see what he thinks.

      The rest of the car is getting better too, it seems that there are so many things to do everytime it comes apart that it gets scary to start tearing it apart at all.

      I need a day of rest from it and have too many things to do to be able to do it.



      May The Horsepower Be With You !!!


    2. #2
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I got the word about 4:30 that the engine will be done late this evening and I might be able to pick it up tonight. I get the truck treatment tonight and if it is tommorow I will use the Vibe. I have already set and engine in the Vibe to see if it was doable with my picker and it is a no problem for clearance and there are 8 hook points to tie it down with. The weight hardly did anything so I can do it that way if I have to.

      I will have iron heads as originally planned, the spring pockets on the aluminum heads were too big. He has dynoed engines with all of the the components and a little less cam and carb and was getting 400 lb of TQ at 2800 rpm and 398 HP at 5800 rpm. I have a bit more cam and rpm range so I expect better but it will be more than enough power to learn with and keep the car under control. I need better brakes if I go any faster and then bigger wheels and then............


      If all goes well I may have it ready to start Friday night or Saturday morning. I expect some delays for something but I should have everything or be able to get it in a few minutes at the local stores.

      It all could go right back in just like it came out and be even better than before, that's the object, Right !!!!!

      The fuel system is going to be better or plan B will come into effect and that will take some fab work but it will solve it for certain and it will get done later unless the new setup work well enough to keep the cell the way it is.

      As long as this is just a base engine swap I should have it go well.

      May The Horsepower Be With You !!!




    Advertise on Pro-Touring.com