Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      The Vibe came thru with the duty of hauling the engine, it was easy and well strapped in. It never moved an inch the whole trip and was easy to bring to the edge and lift out. I once thought about it when I was buying it that it could haul an engine and it did.

      The engine is 9.4:1 with iron heads and with the change of a head gasket will go to 10:1. The parts are all nice stuff and the quality looks good. I am told that it can go to well over 7000 rpm if I ever wanted to go with the valvetrain to do it. 6400 rpm is what the cam is good for and maybe now it will pull the extra 400 rpm with more power.

      I had a friend stop by and we already have it in the engine bay and I can start putting it back together. Can I put it all back together in a day? If it all bolts in good the first time it would be a miracle but then again the sales amount for the engine was full of lucky numbers.

      I think it is going to be a lot faster and best of all not an oil burner. At the cost of oil I think it could have added up to a monthly payment for the engine,LOL.

      More tommorow....

      May The Horsepower Be With You !!!


    2. #2
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      I would like to be telling you that it is running great,

      but the bellhousing alignment is kicking my ass again and I may need some different offset dowels. My dial gauge is also giving me fits and not want to do it's job, may borrow the one I used the last time as it did work much better.

      So I won't make it for the weekend. They are calling for rain on sunday when I wanted to just go up and spectate.

      When the builder called and asked how it runs and I told him I was having trouble with the bellhousing alignment, he told me he could have done it for me real easily. I would have been glad to pay right now.

      Maybe I will go to the MidWest Challenge and be a bit more prepared.
      May The Horsepower Be With You !!!

    3. #3
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      After fighting with the bell housing alignment all weekend I finally got it within .003. It just did not want to find its way to the right spot. The dowels were marked just a little off of the true high side and I don't believe that they always go in perfectly straight when you have to pound them in only 1/2 in.

      I just couldn't put the Richmond in with any run out that would make it shift hard, it shifted really well and never came out of gear. It only had 3.5 run out the last time.

      I think I was up and down 600 times and had it on and off 15 times. :bsjerk: . I am really good at pound the dowels out in a contorted postion. Glad it is over until it goes on a different engine.

      I did get my hood all stiffened up with some wood ,cloth and more glass. it added about 3 lb but it was needed so it hopefully won't flex and need hood pins. I even did a little color sanding to relax my frustation with the bellhousing.

      Now I can get on with putting it all together.

      Really wish I had made the event this weekend.

      Should be running by tommorow if all goes well from here.
      Last edited by Jim Nilsen; 05-03-2010 at 12:05 PM.
      May The Horsepower Be With You !!!




    Advertise on Pro-Touring.com