Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Threaded View

    1. #10
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      step one of the harness is done, the wires came out of the main plug very easily and it was a simple 1/2" hole in the firewall and a grommet to put all the wires for the O2 sensor wires through. I have all the wires back in the main plug and wrapped back up.Now for the fun part of hooking them to where they go inside the car.

      Fortunately the wires are marked for the connections.

      The one thing that seems to bug me the most is how I am going to watch the 2 screens at once? I think I can hook up the other laptop to the wideband for tuning it to start . will it be ok? we will see.

      I probably should hook up the gauge wire output to the Racepak. I will have to look to see if it can go to the usm with no problem with the voltage output. It would be nice to have the a/f ratio on it.I will have to call and talk to Donny and I know he will have the answer.

      If all goes well I will be done with this by the middle of the week.

      I am headed to a swap met tomorrow morning in grayslake,il.

      I don't really need anything but some other friends are going in and i never know what I might find?

      Now for step 2 to take out the gauge panel in the center of the dash and start wiring everything up.

      May The Horsepower Be With You !!!





    Advertise on Pro-Touring.com