Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 546

    Hybrid View

    1. #1
      Join Date
      Apr 2001
      Location
      Rockford Illinois
      Posts
      3,949
      Country Flag: United States
      Quote Originally Posted by Payton King View Post
      Have a pick up tube to a intank filter, to the pump. Outside the tank. I have -10 AN to an Aeromotive filter, filter to Aeromotive EFI regulator. Comes in one side and out the other to -8an to the motor. The return port on the regulator is -6 AN back to the tank. Fuel pressure on an LS1 is set at 60 psi. That is shown in the picture below.

      When I went to the Walbro 225, it was -6 out of the pump that I used a -6 to -10 coupler to go into the the filter. Only change I made.

      Does this make sense? I am running mine in this configuration, so is Steve Rupp, Jody (Mali2ude), Scott Gulbranson (lat-G) the list goes on. Jody is probably the biggest test as he is running a twin turbo LS2.
      W
      Makes sense to me. What micron size filters do you have? 35 in the tank before the pump and 10 before the regulator?

      I just ordered the same regulator today and am making my bracket to hold the fuel pump. They claim the pump I have is good for 800hp so I should be good there.

      So far the change over is going smoothly but time consuming to say the least. I am so glad that I did the engineering to be able to do this just in case.

      Thanks for the pic, that looks really nice and tidy and keeps all of the filters out of the engine bay which I like. The most likely to leak place is always the filter and they are usually in the worst place and can start fires.

      Don't you wish the Walker exhaust clamps had a left and a right so the bolts be going the same direction, it's the liitle details of semetry that I always strive for but can never acheive when they just don't let ya.

      Thanks , this is helping a lot.






    Advertise on Pro-Touring.com