Results 1 to 13 of 13
Thread: DIY Engine Coatings
Hybrid View
-
04-15-2009 #1
Registered User
- Join Date
- Feb 2008
- Location
- Sesser, Il
- Posts
- 490
Fast01 that is the exact brand I had in mind. Care to elaborate on what you used, how you applied, and anything else to care to add?
Anybody else? I am getting ready to rebuild my 383 and can't afford to get things wrong, or to waste unneeded money either.
DougDoug Gulley
66 C10 383, AFR 190, Accel SuperRam, Hyd Roller 230*/236* 280XFI, aftermarket T56, *under construction*
-
04-24-2009 #2
Registered User
- Join Date
- Jun 2007
- Location
- Farmingville, New York
- Posts
- 70
Sorry for not getting back to you sooner, but I'm not on here all that often. Anyway, I used this, http://www.techlinecoatingswebstore....1&product=1314 this, http://www.techlinecoatingswebstore....1&product=1312 and this http://www.techlinecoatingswebstore....1&product=1315
I followed their instructions exactly and am very happy with the results. Of course my wife wasn't happy about car parts baking in the oven! I coated the valve faces, combustion chamber and exhaust ports with the ceramic. I coated the valve springs, and valve stems with the liquid DFL and the valve guides with the powder DFL. I would've done the bearings and piston tops as well, but the short block was already assembled when I decided to give this stuff a try. Hope this helps!
Reply With Quote
