Results 1 to 16 of 16
Thread: C5 Adapter Brackets
Threaded View
-
03-25-2009 #4
Which direction to go?
Here's what I have for my 86 Cutlass:
b-body spindles and adapter bracket, C5 calipers and 13" rotor, alum hub.
I also still have all the stock g-body spindles and brakes installed on car. I have the GW bushings in both the upper and lower arms.
I also have the stock type Global West a-arms (CTA-88A). These are not for the b-body swap that I ordered them for. They are for the stock g-body spindle.
Should I:
#1 Get the a-arms from Marcus to run the b-body spindle?
#2 Use the GW arms with the stock g-body spindle and get a differant adapter bracket? If I go this route, I thought I add the taller ball joints, either upper or lower or both.
Which setup would give me the best handling in a street only car?Doug Gulley
66 C10 383, AFR 190, Accel SuperRam, Hyd Roller 230*/236* 280XFI, aftermarket T56, *under construction*
-





Reply With Quote



