Results 1 to 20 of 29
Thread: which tig machine
Hybrid View
-
01-06-2009 #1
Registered User
- Join Date
- Apr 2002
- Location
- North Central Texas
- Posts
- 720
I have a 351 Syncrowave. Although it has been a few years since I have used it (not enough power in the current shop yet) it is a great welder. The only downfall for me is it requires 200 amps.
-
01-07-2009 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,870
Take a look at the current requirements of each. The inverter based Dynasty welders are a lot more efficient and only require roughly half the supply current of the transformer based syncrowave machines for a given weld current. This can be an important factor in a home shop. I also recall that the Dynasty has more capabilities and adjustability than the Syncrowave 200. That may or may not be a good thing for a novice welder in a home shop.
Miller is pushing the Diversion 185 for home shops. It is an inverter based machine which uses the default settings of the Dynasty 200 DX.
Don1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
Reply With Quote
