Results 1 to 7 of 7
Thread: DSE subframes and 4 link
-
02-26-2005 #1
Registered User
- Join Date
- Apr 2003
- Location
- chbg, pa
- Posts
- 1,157
DSE subframes and 4 link
anyone here install them ? how was the instalation ? also i here DSE will have a 4 link released soon for the 1st gen . anyone know anything ?
-
02-26-2005 #2
Registered User
- Join Date
- Jul 2003
- Location
- Anaheim Hills, CA
- Posts
- 11,967
I have seen the subframes installed.. very nice but not easy at all (then again, when is the good stuff ever easy).. complicated install is the down side but they do not effect ground clearance and do a great job of tying the car together.
As for the 4-link.. I've got nothing.. ;)"A ship in port is safe, but that's not what ships are built for."
1968 Track Rat Camaro:
https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s
1971 Chevelle Wagon with a few mods:
https://www.youtube.com/watch?v=WBVPR3sRgyU
02-26-2005 #3
Registered User
- Join Date
- Apr 2003
- Location
- chbg, pa
- Posts
- 1,157
steve looks like i am going to do the mini tub on the other 69 . hint , hint !!!
kyle told me they wrere releasing something soon . maybe i should wait for the rear set up till i hear what they have ?
02-26-2005 #4
Registered User
- Join Date
- Aug 2004
- Location
- Ortonville, Michigan
- Posts
- 216
Hey Steve do you have any pics of the subframe??Can you tell me more about the pieces that go into?? Guessing that they use the same control arms they currntly sell?
Chris1971 RS Z28 Pro-touring thing......will it ever be done??
02-26-2005 #5
Registered User
- Join Date
- Oct 2002
- Location
- Houston,TX
- Posts
- 630
I think that he was talking about sub frame connectors, not the new sub frame coming out.
James J.
02-27-2005 #6
Registered User
- Join Date
- Apr 2003
- Location
- chbg, pa
- Posts
- 1,157
yeah the subframe connectors through the floor. anyone ever installed them ?
02-27-2005 #7
Registered User
- Join Date
- Jun 2002
- Location
- Oregon
- Posts
- 1,387
I installed them on my '68, not that big of a deal if you can weld, but it did take some time...just make sure you cut the hole in the floor a little small and then trim for a nice tight fit and you will be fine. They come with nice patterns and the SFCs actually fit very well...another quality piece from DSE!!!
I have some install pics on my web page starting on page 2 in the 'Anthonys Camaro' folder...hope it helps!!
Tony
Reply With Quote
