Roller Rocker arm adjustment

[malihoochie]

There are many ways to adjust valves, but I have always preferred to get the motor on # 1 TDC (on the compression stroke). Then adjust both of the #1 cylinder valves. Then turn the engine 90* and adjust the next cylinder in the firing order. Turn motor another 90* and go to the 3rd cylinder in the firing order. continue until you have done all cylinders. You will end up turning the motor over 2 complete revolutions, but it keeps the process pretty easy. You may want to adjust the rockers to a quarter to a half turn rather than just a quarter. Best of luck getting your ride running.