Results 1 to 10 of 10
Thread: Subframe Alignment Issues
Hybrid View
-
09-28-2008 #1
Registered User
- Join Date
- Jul 2007
- Location
- Los Angeles, CA
- Posts
- 1,303
Also one thing isn't clear is the tire to fender gap off on the rear or the front or both?
-
09-28-2008 #2
Registered User
- Join Date
- Sep 2004
- Posts
- 28
Sounds like I might have caused a little confusion... The rear end is aligned properly and the rear wheel fender gaps are perfect.
When the subframe was installed, I did use the alignments holes to align it but it seemed to be a gross alignment method.
The front fender-to-tire gaps are not the same side-to-side. Using a straight edge across the front wheel openings (at the mid-point body line), the passenger side has about 1/8" gap and the drivers side is about 1/2".
With the subframe loose, I wonder if the subframe-to-body alignment holes could be used to move/pry the frame into place?
Reply With Quote
