Looking for wire crimp reference

[yody]

i use this anvil type thing, you stick the connector or end under an anvil that has a point on it. It holds it all together, while you put it on the floor and bang it with a hammer, crimps it like no other. They are like $25, try any electrical supply place like terminal supply.

[1976SR71]

I would also solder / heat shrink when done.
Use a propane torch...And some Silver content solder for the best connection.

[67RSSS502]

yody... i think i know what you are talking about, but just wanted to make sure it is something like this

http://www.usahardware.com/inet/shop...ing/770122.htm

thanks!
Dion
67RSSS502