Results 1 to 14 of 14
Thread: Drivetrain shudder?
Hybrid View
-
06-11-2008 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 362
Be sure to get back to us on the solution..
-
06-11-2008 #2
Registered User
- Join Date
- Sep 2006
- Location
- Henderson,NV
- Posts
- 2,870
Have been doing a lot of research on pinion and driveline angles. Decel vibration is a sign of a pinion angle problem. I think it's to little. Driveline and pinion angle should be equal but opposite. Meaning the driveline points down 3 degrees...the rearend points up 3 degrees. The driveshaft must also be at the right angle. Classic chevy 5 speed has a good article on it along with googl.e If you just replaced U Joints and they are bad already, there is a good chance you have to little angle as well.
Todd
Reply With Quote
