Tri-five radiator support

[Gtrpunk23]

I am currently looking for an aluminum radiator setup for my 56 belair with a blown big block in it. I've been looking at some aluminum radiator support setups, anyone have any ideas where to get one for a reasonable or who makes a nice one?
Thanks
Chris

[ProdigyCustoms]

We sell the PRC units and install them in our projects. Check out Roberts 57 and Sam's 55 on our website. We STUFFED a all aluminum 572CI / 758HP Bill Mitchell motor in Roberts 57 and Sam's 55 runs a 427 Small block. Quality wise these cars scored 985 and 995 of 1000 possible points respectivly at this years at Classic Chevy International Convention

Go to ProdigyCustoms.com. Click the Projects link and look for Roberts 57 and Sam's 55

The PRC is a beautiful piece and less then half the cost of a comparable Be Cool set up.

There is quite a list of options. They start at only $695 for radiator and core support. Add dual fans, A/C condensor, recovery tank, Chrome fan covers, Wiring harness, full polish, rad cap, etc

Fully polished, fully loaded with A/C, they run in the high teens $$$$. Still less then half of price of a Be Cool!

I have one coming in for stock fully loaded.

[email protected] or call four zero seven 832 1752 8AM to 10PM eastern

[55chevyman]

i also picked up a PRC unit. they are really slick setups!

[meenaggie]

AutoRad . . .. Don't know anything about them but found them in Camaro Performer Mag. Looks nice but so does PRC unit. 55 Chevy w/ fans and overflow is ~$1400

Left side under featured products
http://www.autoradradiators.com/products.html

For sale from RS Performance
http://rsperformanceconcepts.com/products/hvac/

[BossaNova]

Dayum that looks nice.

i also picked up a PRC unit. they are really slick setups!

[ProdigyCustoms]

AutoRad . . .. Don't know anything about them but found them in Camaro Performer Mag. Looks nice but so does PRC unit. 55 Chevy w/ fans and overflow is ~$1400

Left side under featured products
http://www.autoradradiators.com/products.html

For sale from RS Performance
http://rsperformanceconcepts.com/products/hvac/

We also just became a Auto Rad distributor and are placing our opening order as we speak.

The Autorad 55 Chevy piece is almost identical in price to the PRC unit. The Camaro set up is super cool........Thanks Steve!

[MuscleRodz]

Have one of those setups in the '57 we are finishing this weekend. Nice piece.

[griff]

Frank, have you installed any AutoRad’s in a First Gen yet? Any Pics?

[jy211]

Looks like Frank will be getting some more of my money...

[ProdigyCustoms]

I have not Auto Rad. I used our PRC unit and it is fantastic. Complete with bigger radiator core, 16" fans, it's a BAdd Boy!

[autorad]

AutoRad can offer you a 67-69 Camaro radiator and core support for $1200 includes side panels, mounting brackets and overflow tank, our options are dual fans with shroud - $400, 3-pc piller panels (upper panels & latch cover) - $200, Ac Condenser - $200, Trans Cooler - $75. Our components are removeable vs all being welded on. I've attached some pictures. You can order directly from us.

[autorad]

You might want to give AutoRad a try. We offer the radiator/core support for $1400 includes the shroud, two 14" fans, overflow tank, side and bottom panels
Options:
Trans Cooler - $75, AC Condenser - $200
Our components are bolt in vs welded on. Ive attached some pics
www.autoradradiators.com

[CapSS92]

I used two PRC setups and both 55's run super cool with the dual fans. Another thumbs up.