Results 1 to 20 of 366
Thread: Introducing - Project 1/2-TRAK
Threaded View
-
10-21-2008 #10
-Moderator-
- Join Date
- Jul 2005
- Location
- Mountain View, CA
- Posts
- 9,583
Hey Tyler, thanks for posting that stuff. If you'd sent me the photos I don't think anyone would have believed it was me making those welds.
Important feature of the Speed-Tech arms that I really want to point out [white arrow]
That bolt is the key to getting the 275x17" tire on a 9.5" rim on the front of a 1st Gen with a stock subframe. It's a steering limit adjuster and it allows you to slightly limit the steering angle such that the tire will not rub the subframe. The loss of steering angle is negligible.
Speed-Tech is the only aftermarket UCA/LCA manufacturer to offer this feature.
Strap gussets on the bushing housings are a nice addition as well. Stronger with a minimal increase in weight.
Of course, the Acetron (delerin) bushings will offer little/no deflection, exceptionally long wear, no squeaking and have a convienently mounted zerk fitting as well.
Tyler informs me that the modification shown above was significantly easier on the Speed-Tech arms than on other available products.Last edited by Damn True; 10-21-2008 at 02:19 PM.
True T.
Whats new with Project 1/2-Trak?
Follow my wisecracks on Sports, Food, Politics and other BS on Twitter.
My blog
When they kick out your front door, How you gonna come?
With your hands on your head, Or on the trigger of your gun?
-
Reply With Quote
