Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 28

    Hybrid View

    1. #1
      Join Date
      May 2007
      Location
      Midwest City, Ok
      Posts
      306
      Quote Originally Posted by maldo
      ???? not sure which set up that is?
      I was saying that I agree I would like to know more about the setup he is running.



    2. #2
      Join Date
      Nov 2004
      Location
      The original home of Nickey Chevrolet
      Posts
      98

      more motor specs for the vid

      Hey Maldo and 01somta,

      • first gen chev small block
      • 10.25 c.r.
      • Ultradyde solid roller
      • .556 lift (intake and exhaust)
      • Duration of 278 deg int/ 290 deg exh
      • 112 deg lobe sep.
      • 1.6 roller rockers
      • Super Victor Intake
      • Pump gas
      • 426 h.p @6100

    3. #3
      Join Date
      Jan 2008
      Location
      Madill Oklahoma
      Posts
      221
      Country Flag: United States
      Maybe the wrong side of the car, but you can hear the exhaust...

      302 cu, Standard Bore, 485 Rear wheel horse, equal length headers, 2.5 inch x-pipe exhaust, flow masters, Paxton supercharger, Cobra Motor Sports intake and Performance Cam, Program ECM, Ect...The car and the engine was built ten years ago, and all the driving the car does is like that...I has only about 500 hard miles since the build.

      The only problem is the ford AOD trans, they like to fall into third gear and Overdrive too fast You can hear the Slide into overdrive in the video...LOL..I Broke the shifter in the second run trying to shift back to LOW fast enough to hold second gear for a bit..I dont understand there Reasoning, NO Second Gear selection at the shifter for the Fords..... Plus no scotch blocks or Line locks, and 3.08 Posi Rear end, so my rear brakes are grabbing a bit...

      http://www.youtube.com/watch?v=O4mGGFFuuO4




    Advertise on Pro-Touring.com