86 Cutlass g-machine

[Samckitt]

Doug,

I have the B-body set up already; my kit was put together by Robert Adams years ago. I like it, but there is an upgrade coming to the rear and I want the front to match.

This C5/B-body setup sounds like the same process as the LS1 brakes onto the stock spindles.

You have a PM.

Thanks!

The LS1 calipers & the C5 calipers are basically the same, some extra cooling fins on the C5s, not sure if piston size is the same or not. The main difference between the assemblies is the carrier bracket for the caliper that mounts to the spindle/knucke is shorter on (I think) the LS1 calipers than it is on the C5 calipers.