Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14

    Threaded View

    1. #9
      Join Date
      Apr 2002
      Posts
      777
      Country Flag: United States
      scogin918,

      I checked out the site. In the drivetrain section here:

      http://www.musclemotorsports.com/dri...sing-only.html

      it says: Oval Track Rears are Cambered out on Right Rear and in on Left Rear.

      Road Course Rears are cambered out on both sides

      Speedway Rears are not cambered at all. (straight up both sides)

      First, I'm confused on how they describe the difference on the cambering of the oval vs. the road course housings.

      Second, you wrote yours is "straight up" which I assume is non cambered correct?

      Also to note, regarding the pinion offsets you mentioned per: http://www.stockcarproducts.com/rear25.htm

      Remember also that the tire stagger gives you natural camber. Narrow rear ends with large amounts of stagger have lots of natural camber. Conversely, wider rear ends with small amounts of stagger will have less natural camber.

      Just a pointer to pass along.



      So please tell me more about your rear. no, I mean on your car what snouts and hubs are on it? What car are you working on? From my conversation with Neil at stockcarproducts only "speedway" rears should be considered for full size/weight cars. The difference in the housings I'm told is the snout and hub. Also, I can't find a reference on Moser's site for the 5x4-3/4 hub you mentioned. I called and asked at stockcarproducts, quarter master, and speedway engineering if a 5x4-3/4 hub was available or compatible with the speedway rear and all said no, nor could a speedway hub be machined for that bolt circle because there would not be enough much material surrounding the bearing.

      I've got a HTH truckarm ready to go in, is yours in already? I'd like some feed back on how your install went.

      MoeBawlz, the way I look at it, it's a 9". Unless you've got all lightweight parts like thin gears and housing, gun drilled axles ect. why would the rear not take the abuse any other street 9" does? Worried? Add a brace and better pinion support. I will admit though, the race stuff will need maintenance (like packing the wheel bearings ect.) and throw grease that a factory built housing won't but who drives 20K miles a year to worry about it?

      --JMarsa





    Advertise on Pro-Touring.com