Fuel level sender

[Tiger]

Thanks for replying guys, I found a VDO unit at summit but I'll definitely look at the Wiha unit beforebuying.

I started planing a SS tank as well. Care to share any specifics? Baffles?

I dont mind sharing, my plan is as follows:
since I have narrowed my frame I cannot fit a standard tank in my frame anymore so I'll have to build one.
it will be 20" long and 39-40" wide, then it will have a height of 7 1/2" for half the lenght and then it will narrow down to about 5" at the bumper.
I plan to make four extra "sides" and use them as baffles lenghtwise and then I'll make one or two baffles sidewise and a "can" around the pickup tube.
for now my car will be carbureted but I'll make a "pullout" part on the top so I can put a fuel pump in it in case I'll go EFI.
Since it will go in a 68 Chevelle that have a fixed tube I'll us a 2" filler tube with a boat filler cap at the end (see pic), I plan to turn it down so it will basicly just be a cap at the the end of the tube.