Results 1 to 20 of 21
Thread: c10: Baer vs???
Hybrid View
-
03-31-2008 #1
Registered User
- Join Date
- Aug 2004
- Location
- Rowlett Tx.
- Posts
- 201
The PBR twin 40mm piston caliper in good ol' basic black . . .....
-
03-31-2008 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rowlett Tx.
- Posts
- 201
Billet alum hub w/the correct C10 bearings & ARP screw-in studs . . .....
03-31-2008 #3
Registered User
- Join Date
- Aug 2004
- Location
- Rowlett Tx.
- Posts
- 201
Spindle + adapter bracket.
Spindle + bracket + hub.
Spindle, bracket, hub + 13.4" rotor.
Spindle, bracket, hub, rotor + C5/6 caliper.
03-31-2008 #4
Registered User
- Join Date
- Aug 2004
- Location
- Rowlett Tx.
- Posts
- 201
C5/6 13.4" brakes in a 20x8.5" Coys C-5 wheel . . .....
Close-up of the Coys 20" wheel & how much stem to caliper clearance there is. These are a little bigger than the 12" HD C10 brake option
.
04-01-2008 #5
Registered User
- Join Date
- Jun 2007
- Location
- Huntington Beach, CA
- Posts
- 624
ScotI, nice write up with lots of pic's!
Rick
-----------------------------
" Better to Be Lucky than Good "
04-01-2008 #6
Registered User
- Join Date
- Aug 2004
- Location
- Rowlett Tx.
- Posts
- 201
Should have some matching rears in the near future as well.
06-01-2012 #7
Registered User
- Join Date
- Sep 2010
- Location
- corona,ca.
- Posts
- 1,130
I know this is an old thread,but cant you use the camaro,chevelle etc. Drum hubs that aftermarket co. Make or oe ones and bore bearing id for truck ones?does anybody know what bearings these big use?are they bigger or smaller?
Originally Posted by ScotI
Reply With Quote
