Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 11 of 11
    1. #1
      Join Date
      Sep 2005
      Location
      Carbondale, IL
      Posts
      48

      need a custom bellhousing

      ok I need to find someone that can custom fab a bellhousing for me.

      I would like to put a LS1 type T56 behind a ford inline six.....

      the kicker being it is an aussie motor so will need it all custom fabbed. I am fine with Steel (esp if it can meet SFI specs) and might need a couple of them made up. I can provide a block with crank and anything else needed.

      so is there anyone on here that cna help? or is this better asked in another section?



    2. #2
      Join Date
      Apr 2001
      Location
      The City of Fountains
      Posts
      16,130
      Country Flag: United States
      Quote Originally Posted by 62fairlane
      ok I need to find someone that can custom fab a bellhousing for me.

      I would like to put a LS1 type T56 behind a ford inline six.....

      the kicker being it is an aussie motor so will need it all custom fabbed. I am fine with Steel (esp if it can meet SFI specs) and might need a couple of them made up. I can provide a block with crank and anything else needed.

      so is there anyone on here that cna help? or is this better asked in another section?
      Try these guys for a conversion bellhousing:

      http://www.dellowauto.com.au/main.html

      Looks like they make one to mate a Tremec with the inline Ford engine. So you can use the TKO, or if your in love with the idea of a T56 just use a GM conversion style T56 with the adapter plate that is designed to bolt to older bellhousings (which share bolt pattern with the TKO, T10, Muncie, etc...)

      Double check input shaft lengths and verify pilot bearing depth. Depending on the crank offset of the inline 6 you may have to get a custom pilot bushing made. Very simple for any machine shop to make a bronze pilot bushing.

      Andrew
      1970 GTO Version 3.0
      1967 Cougar build
      GM High-Tech Performance feature
      My YouTube Channel Please Subscribe!
      Instagram @dr__efi
      I deliver what EFI promises.
      Remote Holley EFI tuning.
      Please get in touch if I can be of service.

      "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her

    3. #3
      Join Date
      Aug 2007
      Location
      NW Oregon
      Posts
      581
      Country Flag: United States
      www.wilcap.com he can make adapters for just about anything.

    4. #4
      Join Date
      Jan 2005
      Location
      Boonville, Missouri
      Posts
      924
      Try Quick Time - Ross needs another challenge!
      Tony Edler
      Illumin8s
      See Illumin8s at www.illumin8s.com

      '73 Dodge Challenger

    5. #5
      Join Date
      Sep 2005
      Location
      Carbondale, IL
      Posts
      48
      I would like the double over drive being I am not in a major metro area and will be doing a bit of highway cruising. plus it is the fact no one has done it .

      I thought of adaptors but looking for a cleaner install and not sure on how input length will work into it with my existing bell (plus all the factory bells are cast iron on these motors)

      do you have a link to Ross at quicktime?

    6. #6
      Join Date
      Sep 2004
      Posts
      135
      I don't know what the bolt pattern is for a Ford 6-banger bellhousing, but just maybe it is the same as either the 5-bolt or 6-bolt early 221/260/289/302 engines.

      So maybe Lakewood makes a blank that you can start w/.

      I do know that Lakewood has several custom bell housings that mate trannies such as the Mopar A833 and Top-Loader to Chevy V-8's so maybe you will get lucky??

      pdq67

    7. #7
      Join Date
      Sep 2006
      Location
      Windham, NH
      Posts
      965
      Country Flag: United States
      These guys are great to deal with:

      http://www.browellbellhousing.com/

      Phil
      Build site: www.73camarobuild.com
      Business: www.classiccarblasting.com

      Like us on Facebook!

    8. #8
      Join Date
      Sep 2005
      Location
      Carbondale, IL
      Posts
      48
      no go with lakewood.

      The Browell housings look nice but a little overkill for what I am needing I think.

      I guess Iw ill talk to some aussie folks but maybe I will end up with a TKO.

    9. #9
      Join Date
      Aug 2004
      Location
      Walla Walla, WA
      Posts
      1,512
      Country Flag: United States
      Talk to the tech line at McLeod Industries. They are pretty serious about adapting the T56 to a variety of engines, and something in their modular bellhousing line (even if it needed redrilling for your motor) may be the easiest and cheapest way to go.
      Mike Kelcy - '68 Camaro with some stuff done to it.

    10. #10
      Join Date
      Sep 2005
      Location
      Carbondale, IL
      Posts
      48
      well one of the big issues is I have a high mount starter (above the oilpan line)

      BUT I do use a zero balance SBF flywheel (with a different bolt pattern drilled on it)

      I do have a iron toploader bell but it weighs a ton and has a passenger side clutch fork (cable) will will need to be converted to a pull style external hydro setup or use a 12' long clutch cable....

    11. #11
      Join Date
      Sep 2004
      Posts
      135
      Go back years and see if any of the late flathead and way early "Y"-block Ford stuff won't by chance fit???????????

      pdq67




    Advertise on Pro-Touring.com