Results 1 to 4 of 4
Thread: drive shaft length
-
01-17-2005 #1
Registered User
- Join Date
- Aug 2004
- Posts
- 830
drive shaft length
how do you make the measurement for a drive shaft?
-
01-17-2005 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
01-17-2005 #3
Registered User
- Join Date
- Aug 2004
- Location
- Spring, TX
- Posts
- 222
All i did was make sure the weight was on the axle and the car was level...Then i took my driveshaft that was too short and put it all the way in the transmission (T56 trans) and then pulled it out 1 inch and measured from the center of the two u-joints...Came out EXACTLY right for my application.
William
01-18-2005 #4
Registered User
- Join Date
- Aug 2004
- Posts
- 830
ok thanks
ok thanks guys
Reply With Quote
