Results 1 to 3 of 3
Thread: Engine Test Stand
-
10-21-2007 #1
New to Pro-Touring
- Join Date
- Jul 2007
- Location
- Marion, IL
- Posts
- 52
Engine Test Stand
Does any one have pics or drawings of an engine test stand for a SBC? I have an engine stand but would like to set up for break in and startups.
-
10-27-2007 #2
Registered User
- Join Date
- Apr 2007
- Location
- left coast
- Posts
- 66
Here's one I built about 20 years ago. Fun project as I learned how to weld while I was building it.I believe the notch at the left rear vertical mount was for the starter motor. It's been stored outside for about 15 years so I would say that Tremclad is holding up not too bad.
-
11-06-2007 #3
New to Pro-Touring
- Join Date
- Jul 2007
- Location
- Marion, IL
- Posts
- 52
Here is last week's progress. I went with brackets welded on the framing, for a bolt-together, adjustable construction. The console swivels 360 degrees and I have a swing arm so that it will extend all the way to the front. Still to come are the radiator brackets, fuel cell mount, battery mount, drip pan, and tool trays.
-
Reply With Quote
