Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 12 of 12

    Threaded View

    1. #7
      Join Date
      Feb 2006
      Location
      SoCal
      Posts
      1,622
      Thanks Lee!

      I think I'm going to pick up an orbital sander and run some 120 grit dry on it to get all the clear coat off good or bad! I figure if the clear coat oxidized, even if some of it is still adhering, it may have adhesion problems at some point so I'm going to sand the entire clear coat off the hood first to test it and see how it does! I'm probably not going to use implememnt paint but whatever the best rustoleum I can find be it marine or whatever and see how it goes on. In the original thread it says that I should use mineral spirits so I think I will try that first and see how it works out. Wish me luck!

      '66 Chevy II - The "NEW" '69 Camaro!

      ***Under Construction***

      Build Update Link:

      https://www.pro-touring.com/forum/sh...ad.php?t=17108





    Advertise on Pro-Touring.com