Results 1 to 20 of 28
Thread: offset 3-link
Hybrid View
-
06-05-2007 #1
Registered User
- Join Date
- Sep 2006
- Location
- New York, NY
- Posts
- 458
I didnt plan on the brackets being too far from centerline, just because this is a truck, so the frame will be relatively visible, and a mount jutting down from it will also be. Herb Adams says anywhere from 3" to 7" is good, with 5" being average. I have 18" rear wheels. The bottom of the differential is about 5 3/4" below axle centerline, so I would like to stay above that. They will probably end up being at about 5" from centerline. Thanks for the tip.
Setting the mounts further from the axles doesnt really have an effect on the LCA angle. When figuring out the math, I wanted to have roll understeer, and the only way to get it is to point the LCA's downwards towards front of car.
Jerome
-
Reply With Quote
