Results 1 to 20 of 76
Thread: New RX7 project
Hybrid View
-
05-12-2007 #1
Registered User
- Join Date
- Nov 2000
- Location
- O-town
- Posts
- 4,330
I want one too, thta guy car is really nice!
Steve68- 1968 Camaro SS LSX T56, 12bolt 3:90's, 18" Fikse Profil 13s, Deep Fathom Green paint, Spearcos, just bunch of old junk because another member said so, LOL
70 Nova SS street/drag 454, T400, 3:55, ugly!
-
05-12-2007 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Busy morning and early afternoon so far.
Install the flywheel and torque to 107 lb/ft in a star pattern:
Clutch cover, flipped upside down:
Pressure plate added making sure everything is ultra clean:
Then the disk:
This is what a real clutch alignment tool looks like:
Alignment tool inserted. Disk lined up. Clutch cover tightened to 24 lb/ft with a dab or red locktite:
All done. The whole assembly with the flywheel and clutch is about 22 pounds:
After installing the clutch I double checked my setup height to make sure that the throw out bearing was in the proper position. Everything looked great. Transmission was attached to the engine and the engine is in the car. I will take more pics later.
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
Reply With Quote
