Results 1 to 11 of 11
Thread: Rear End ratio help
Threaded View
-
12-22-2004 #10
Registered User
- Join Date
- Aug 2004
- Location
- Columbus, Ohio
- Posts
- 117
Cam specs
The motor was built by Golen Engines in N.H. Great guy to work with.
Here are the CAM specs
Intake is 224 @ .050 lift = .477
Exhaust is 230 @.050 lift = .480
Looking at the Dyno chart, it makes 400ftlbs at 2250 rpm. not 1750 like I had previously mentioned.
More input is welcome! Thanks!
DarrenLast edited by Fluid Power; 12-22-2004 at 01:21 PM. Reason: added to post





Reply With Quote



