Shifter boot with TKO

[italiano362]

What shifter boot are all you Tremec users going with? I am undedided which one to go with in my 67. Is the Hurst Super Boot too large? Any pics would be great.

[dhardison]

Do you mean a console/floor boot or a shifter boot? The TKO-500s and 600s come with a "shifter boot" to cover the shifter internals (http://www.classicchevy5speed.com/images/TKO-500.jpg).

I have a Pro 5.0 shifter on my spare TKO-I that didn't come with any sort of boot and had to purchase a Hurst Tremec shifter boot to keep dirt/debris out (http://www.danhardison.com/TKO/DSC03041.JPG).

[italiano362]

I am talking about the floor boot. I do not have a console. The TKO 600 came with the mini dust boot.

[68BNUT]

I just used a cheapo hurst one from auto zone. Looks okay.

[malihoochie]

I think in most cars the "super boot" from Hurst is a little large. I used the next size down in my car w/o a console. 3 1/2" x 4 1/2 just fits over the TKO "tower".

[Rybar]

have you seen the Lokar boots? That's what I ran:

http://www.lokar.com/interior_pages/indicatorsboots.htm

[ProBell]

I modified a stock 99 Camaro rubber floor boot for a good seal around the Pro 5.O and floor. I run the counsel but You could run the carpet over the rubber boot and then run any decorative boot you want.

[PT Goat]

I'm running the cheaper ($16) Hurst boot under the carpet, mostly to seal sound/fumes. Got it at Autozone. My factory console hides the install.