68 Camaro Project

[Tucks69]

Hey Fella's

I thought I would share my temporary project with everyone. I am building a 69 Camaro, but the progress is slow!!! I have a 68 Camaro Bracket car that I decided to put back on the street. I have already installed C5 Brakes front and rear. The car stops really well. I have a powerglide and a 355ci motor with 4:56 gears. I plan on dropping to a 3:73 gear and an overdrive. I can't make up my mind between a straight drive or automatic, so give me suggestions. The motor has a radical cam, so a 5 speed may work better. I thought having a driving project would keep me motivated on the 69. I plan on your basic primer paint job. When the 69 is completed then I will redo the 68.

Mike

[dropit69]

looks good !!..i love sticks but up to individual...

[Tucks69]

I would like to have the stick too. But everytime I start pricing the changeover it makes the auto look cheaper. Although my friend say's he knows a guy in SC that has a junkyard with multiple late model f-bodys. I will have to check him out.

Mike

[aussiebj]

What size rims and tyres are you running and offsets thanks nice project .....Barry

[Tucks69]

What size rims and tyres are you running and offsets thanks nice project .....Barry

17x8 rear 4 inch backspace 17x7 front 4 inch back space. 285/40/17 and 245/45/17. Needs wider wheels but that will come later!

[Dream68]

looking great man, I cant believe you have two first gens. You are one lucky guy. Yea we arent to far from each other. Any good cruise inns down your way??

[Tucks69]

We have one here in Hamlet the first fri of the month, but it is not growing much. We might have 30 to 35 cars. I grew up in Oakboro, there cruise in brings alot of nice stuff into town. Albemarle has started a cruise in also.
I would like to see your project some time.
I have 2 first gens, my dad and sister have one a piece, my uncle has 4 i think, and my couisin has 3. Makes for fun family reunions.

Mike

[Dream68]

yea I try to go to the Oakboro show when I can since its close. About how far down from Marshville is Hamlet?? I would love to come check out a cruise down there some time.

[Tucks69]

It would take about 45 minutes straight down 74HWY exit at 177N exit. Then about 2 miles to town. It is the first Friday of the month. They have a burnout contest sometimes. Let me know if your coming sometime.

Mike

[Tucks69]

The camaro has changed since the first post. I did install a 3.48 gear with a limited slip dif. Changed the powerglide to a 350 turbo. Changed the cam to a one that improved bottom end instead of top end. I tried to get it ready for the RTTH4 but just could not make it. Too many gremlins to work out.
Mike

[Dream68]

looking good mike, maybe when we both get done we can do alittle cruisin around here. Even if we cant make it to the RTTH4. Looking foward to see the progress

[Dream68]

Just wanted to see how the progress was coming. Had any time to work on anything lately?

[Tucks69]

I thought I would update this post, since the 68 Camaro has progressed into a fun A$$ car! This year It has been beaten on severly. We made it to the PSMC in GA this year and the RTTH5 in TN. The 68 has C5 brakes all around, IROC steering, and hothkis springs and swaybar. It needs some rear suspension upgrades, but I am trying to concentrate on my 69 project, so that will have to wait. I installed a 350 turbo, and 3.43 gears, still has high rpm on interstate but it is drivable. The 68 drives great now with the power steering, and the trans and rear gear it runs the autocross in 1st gear. It needs better tires, but it kinda gives you a little autocross with some drifting mixed in!!

[rlplive]

I dig it, we need more pics.

[Dream68]

Looking good!

[SPECTACULAR]

ME Lykie!!!!!

[Mr.VENGEANCE]

thats my boy..

[Tucks69]

thats my boy..

Can,t wait till July for the PSMC Amir!!

[John Wright]

Any New pics?

[Tucks69]

Any New pics?

Here is a couple from this past year!

PSMC 2009

PSMC 2009