Rear Disc Brake Help

[GTOConno]

Thanks for the replies, the rotors are snugged up to the face of the axle flange, but I will double check that. I told Moser that I was using T/A disc brakes on them when I ordered the axles.

Also I checked the distance from the face of the axle flange to the face of the axle flange (out to out width) and it is the same as another rear I have in my shed.

I'll try mounting the brackets on the outside of the axle flange, but I think it will hit the rotor.

Does anyone make offset brackets?

Thanks again

[Skip Fix]

The factory brackets go outside the flange.