Results 1 to 3 of 3
Thread: aftermarket deck
-
01-02-2007 #1
Registered User
- Join Date
- Aug 2004
- Location
- Red Deer, Alberta, Canada
- Posts
- 1,364
aftermarket deck
Where are you guys getting all of your wires from for an aftermarket deck? I'm putting a system into the Chevelle and am curious towards where the "best" spots are to snag power from.
mucho appreciated
-Matt
Matt
72 Chevelle 370ci, 76mm single turbo, TKX, Speedtech Track Time, Millerbuilt Strange full floater 9", Brembo brakes, BC Forged 18x11s with 315s square
Instagram: Cst_koon
-
01-06-2007 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,129
Power for the deck or for the amp? In my GTO the amp gets power directly from the battery through a 100AMP fuse. I don't have a deck, just an iPod hooked directly to the amp. You should have a few spare circuits on the stock fuse panel where you can draw power for a deck.
Originally Posted by protour_chevelle
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
01-11-2007 #3
New to Pro-Touring
- Join Date
- Jan 2007
- Posts
- 54
For the power of a deck I would run off the ACC hot on your ignition. That way when you turn of the car the raido turns off and you dont kill your battery. The ACC wire is the pink (it should lead up to the accessorie side of the ignition) wire leading to the ignition switch.
Reply With Quote
