Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 8 of 8

    Hybrid View

    1. #1
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      basecoat

      james you can wet sand the base, but it needs to be re-coated before clearing, also nitro watch out for re-coat times with whatever paint you are using, basecoat is generally 24 hrs before scuffing or scothbrite is needed, goodluck, looks nice
      jake



    2. #2
      Join Date
      Aug 2004
      Location
      absecon, new jersey
      Posts
      405
      Country Flag: United States
      Thanks Guys, ive been painting for 15+ years,i do custom harleys,flames,ghost flames etc....thats only a light base i sprayed.Its getting covered in electronblue then cleared.I only sprayed that as a guide coat to make sure everything is straight and a good solid base before i continue.
      73 corvette chop top silver LS6 motor ,LS6 intake,700r4,2400 pro torque convertor ,3.70 gears,modified hooker sidepipes to fit LS1,17 x9.5 boyd starburst,nitto 275/50/17-255/50/17 tires,vb&p suspension,nitrous,L-88 headlights,autometer guages.L88 hood,flares,spreader bar,vb&p sway bars

    3. #3
      Join Date
      Aug 2004
      Location
      Dallas, TX
      Posts
      64
      Country Flag: United States
      Quote Originally Posted by nitrovette
      Thanks Guys, ive been painting for 15+ years,i do custom harleys,flames,ghost flames etc....thats only a light base i sprayed.Its getting covered in electronblue then cleared.I only sprayed that as a guide coat to make sure everything is straight and a good solid base before i continue.

      so basically the only reason you shot the base is to see if it was truly flat? Is that a metallic? I've heard that you can't wet sand a metallic base.

    4. #4
      Join Date
      Mar 2003
      Location
      Boringville
      Posts
      1,987

      nice body

      that last picture with the back corner of the car loooks really good. Looks like great body work! whats up with the hood htough, looks a little off, Darn fiberglass hoods!! what year vette is it? I have always really like the early ones! what kind of motor? woops nevermind just read your sig. Does yours have the chrome bumpers?

    5. #5
      Join Date
      Aug 2004
      Location
      absecon, new jersey
      Posts
      405
      Country Flag: United States
      Thanks,The hood isnt closed, its up ,its my original hood that i cut along the factory lines raised it to 4 inch and reglassed it back togther.Its a 73 ,the 73's only had chrome bumpers in the rear and rubber in the front,im changing the front bumper to fiberglass though.Curretnly running tpi but looking to swap over to a ls-1 next year, ihave too much on my plate right now(baby coming,house addition)to use the cash for that.
      And i havent had one minute to to get back to painting it,now im down and out with kidney stones.
      73 corvette chop top silver LS6 motor ,LS6 intake,700r4,2400 pro torque convertor ,3.70 gears,modified hooker sidepipes to fit LS1,17 x9.5 boyd starburst,nitto 275/50/17-255/50/17 tires,vb&p suspension,nitrous,L-88 headlights,autometer guages.L88 hood,flares,spreader bar,vb&p sway bars




    Advertise on Pro-Touring.com