Results 1 to 6 of 6
Thread: Install a temp gaue with no bug
-
09-22-2006 #1
Registered User
- Join Date
- Dec 2002
- Location
- New York
- Posts
- 409
Install a temp gaue with no bung in tranny pan
Is there a way to install an electronic temp sensor for a transmission - but not in the pan - no bung? Is there any way to do it in-line with the cooling lines?
-
09-22-2006 #2
Registered User
- Join Date
- Feb 2005
- Posts
- 328
I installed mine using a T-fitting. The temp sensor screwed in using an adapter. Cost, about $30.
-
09-22-2006 #3
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
-
09-24-2006 #4
Registered User
- Join Date
- Apr 2002
- Location
- North Central Texas
- Posts
- 720
This is what I planned on using also.
Originally Posted by rocketrod
-
09-24-2006 #5
Registered User
- Join Date
- Apr 2006
- Posts
- 617
It is not that hard to add the bung to the pan. If you add a bung you will end up with a lot less points that can leek or fail and you do not need to mount any extra parts. It also adds a drain point if you do not have one already. Just my .02$. Randy
Please see my PT Garage for more info on ProBell Camaro. 67 style,99 comfort, options and drive-ability with NASCAR Late Model suspension front and rear.https://www.pro-touring.com/forum/vb...?do=view&g=106
------------------------------------------------------------------------------------------------
Car Domain PG
http://www.cardomain.com/ride/2565383
09-25-2006 #6
Registered User
- Join Date
- Dec 2002
- Location
- New York
- Posts
- 409
That was my original intent - however the tranny shop that built my new tranny - forgot to put a bung in for me - which got me upset - really do want to take apart the new pan - and break the seal and redo - just want to get it in the car - reason why I was looking for another alternative to a welded bung.
Thanks guys - that autometer part is exactly what I will need.
Reply With Quote
