Results 1 to 8 of 8
Thread: short
Threaded View
-
08-16-2004 #4
Registered User
- Join Date
- Sep 2003
- Location
- Tampa, Fl
- Posts
- 274
There is definately a wiring problem if no short then. With you blowing a 30 amp fuse as soon as you connect the switch there's a wire going to ground somewhere or some thing isn't wired right. Can yo back probe with the switch hooked up and battery disconnected? Set a digital multimeter to continuity and check all the wires to ground. Or can you make a pigtail and connect the wires one by one until you connect the wire that is causing the fuse to blow?
-
Reply With Quote
