Results 41 to 60 of 60
Thread: Core Support Closeout
-
04-11-2006 #41
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
just installed mine...looks awesome. now trimming your support bars...is that for 69's only because mine doesnt even come close to the support bars....its suppose to sit under the 2 bolts that attach the hood latch to the header panel. now if you install it above those 2 bolts...then it interferes with the support bars........just curious.....LMK.....
colt zantop
1968 camaro LS1.......aka......."NJECTED"
-
04-11-2006 #42
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
I will install mine on thursday. My studs broke off so I am just going to weld nuts on and thread the new bump stops into the welded nuts. When I was mocking it up it looked great!
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
04-13-2006 #43
Registered User
- Join Date
- Aug 2004
- Posts
- 1,464
OK gotta say it before someone else does....
-
04-13-2006 #44
Registered User
- Join Date
- Aug 2004
- Posts
- 1,464
DAMN!!! Oh well just had to have it!!!...... Just placed my order
-
04-13-2006 #45
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
I just got done bolting it in. Looks great. Sorry no pics yet.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
04-14-2006 #46
Registered User
- Join Date
- Feb 2005
- Location
- Tallahassee + Seminole, Florida
- Posts
- 506
Well.. damn you!
Originally Posted by CAMAROBOY69
-
04-14-2006 #47
New to Pro-Touring
- Join Date
- Jan 2006
- Posts
- 22
Did you get in in allright? Sorry about the instructions, I'll make good. Here's a black baked enameled panel I engraved as a sample, don't think it'll last long. Originally Posted by CAMAROBOY69
[/IMG]
[/IMG]
'69 Camaro RS/SS 396
'72 El Camino SS 350
'47 Chevy Streetrod
'54 Jaguar MK VII
'02 Blazer Xtreme
-
04-14-2006 #48
Registered User
- Join Date
- May 2005
- Location
- Fontana, CA
- Posts
- 4,960
Come on, the time has come. I want to see what it looks like. Originally Posted by CAMAROBOY69
Nick R.
69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
08 HHR SS - Still Stock for now
Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?
-
04-15-2006 #49
Registered User
- Join Date
- Sep 2004
- Location
- Santa Barbara, Ca
- Posts
- 1,174
I bought one too, couldn't pass it up for that price. My front end is apart, so it will be a while before it is installed. Lets see some installed pics guys!
-
04-16-2006 #50
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
heres some installed pics you guys asked for...sorry for the crappy pics....
http://img.villagephotos.com/p/2006-...7/MVC-003S.JPG
http://img.villagephotos.com/p/2006-...7/MVC-001S.JPGcolt zantop
1968 camaro LS1.......aka......."NJECTED"
-
04-16-2006 #51
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
Colt z,
Looks great
-
04-17-2006 #52
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
thanks! I think its the best 55.00 bucks ive spent in awhile on this car..
colt zantop
1968 camaro LS1.......aka......."NJECTED"
-
04-17-2006 #53
Registered User
- Join Date
- Jul 2003
- Location
- Anaheim Hills, CA
- Posts
- 11,967
Looks great.. and MUCH better than the open hole.. Originally Posted by colt zantop
"A ship in port is safe, but that's not what ships are built for."
1968 Track Rat Camaro:
https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s
1971 Chevelle Wagon with a few mods:
https://www.youtube.com/watch?v=WBVPR3sRgyU
-
04-21-2006 #54
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
THANKS Steve! where is everyone elses "installed" pics!!! I posted mine...let see some others guys!!!!! I know a ton of you ordered them!
colt zantop
1968 camaro LS1.......aka......."NJECTED"
-
04-21-2006 #55
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
I put the camaro aside now that my road track event is done at gingerman. Spent the last couple months neglecting Heather and her mustang. Last night I moved all the boxes and misc items off of my girlfriends Mustang and put them on my Camaro. So the camaro is going to rest for a while and the Mustang is going to get the attention.
I will try to get pics sometime within the next couple weeks. He sent me a new one because the other one I had was missing the bends at the end. So after I install this new one I will get pics. The other one still looks great on there but this new one will be even better. Socal69 has great customer service and will make sure you are 100% happy. He is going to do real well with his products.Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
04-26-2006 #56
Registered User
- Join Date
- Feb 2005
- Location
- Homer Glen, IL
- Posts
- 189
Here is some pics of installed panel
-
04-26-2006 #57
Registered User
- Join Date
- Feb 2005
- Location
- Homer Glen, IL
- Posts
- 189
one more time
-
04-26-2006 #58
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
NICE! thanks for sharing.....any others??
colt zantop
1968 camaro LS1.......aka......."NJECTED"
-
05-07-2006 #59
New to Pro-Touring
- Join Date
- Mar 2005
- Posts
- 23
This is a pic of the DSE core support closeout we just installed. It fit perfectly. We painted it black to match the car/engine bay. I also used the DSE hood hinges which I salivate over every time I see them. An incredible piece of engineering. Well worth the money.
-
05-08-2006 #60
Registered User
- Join Date
- Nov 2003
- Location
- michigan
- Posts
- 1,232
very nice! thanks for sharing! those hood hinges are on my list
colt zantop
1968 camaro LS1.......aka......."NJECTED"
Reply With Quote
