Results 1 to 20 of 60
Thread: Core Support Closeout
Hybrid View
-
03-23-2006 #1
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
My closeout from SoCal69 should be here wednesday the 29th.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
-
03-24-2006 #2
Registered User
- Join Date
- Jan 2003
- Location
- Arizona
- Posts
- 5,394
That sounds too cheap. Better hurry up and place an order before the seller realizes that he ain't making any money.
________________
Steve Chryssos
03-24-2006 #3
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Originally Posted by streetfytr68
Thats exactly what I thought. I dont know how he can sell them for that price. Even the shipping price was affordable.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
03-24-2006 #4
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
I agree that he could get more $$ for his closeout. Based on his post over at camaros.net, http://www.camaros.net/forums/showth...light=closeout, he said,"The metal is .060 aluminum CNC machined on my mill table.". Anyone know what a sheet of .060 aluminum goes for? I can't imagine that he isn't making some decent $$ given the cost for materials. Originally Posted by streetfytr68
03-24-2006 #5
Registered User
- Join Date
- Aug 2004
- Location
- SoCal
- Posts
- 1,008
Got it yesterday - this is a nice piece. It's not just flat stock either - it has some bends in it. I will try to take it over to my car when I visit it in the paint slammer today and see how well it fits. There's even an adhesive strip on the top to protect against scratching during shipping!
03-30-2006 #6
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
What bends does yours have in it? Did you buy the one from SoCal69? Mine arrived yesterday and its just flat. It looks nice but I didnt have any bends or anything in mine. I would have had it installed last night but the 2 bolts that hold it in snapped right off in my car. Thats just how my luck has been this month. At least the closeout piece is nice. this is the bottom view. The top has a protective strip that I didnt want to peel off yet. Originally Posted by rockdogz
Got it yesterday - this is a nice piece. It's not just flat stock either - it has some bends in it. I will try to take it over to my car when I visit it in the paint slammer today and see how well it fits. There's even an adhesive strip on the top to protect against scratching during shipping!
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
03-30-2006 #7
Registered User
- Join Date
- Aug 2004
- Location
- SoCal
- Posts
- 1,008
I think so, ebay name was derelss396. It looks like the same piece, except about 4" or so from each end was bent slightly.
03-30-2006 #8
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Mabey he doesnt bend them any more.
Mine was perfectly flat.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
Reply With Quote
