Results 1 to 20 of 28
Thread: Ridler 652
Hybrid View
-
10-21-2024 #1
Registered User
- Join Date
- Mar 2005
- Posts
- 168
Put a 275/35/18 on the frame today. Just to get an idea what I was looking at. This one is a 9.5" with 6" BS.
Turns out I don't love the wheel with that much back space. From most angles you can't even tell the tire is wide. This is the car I pulled the wheel from.
-
10-28-2024 #2
Registered User
- Join Date
- Mar 2005
- Posts
- 168
Well 305's for the rear aren't looking possible either. Like I said I have the body off the frame for another week or so, so I can't get a super accurate measurement. I bent a 12" wide aluminum rod today to simulate a tire. I was hoping to run the wheel just to the bottom of the high part of the rear wheel openings. In that scenario, it looks like i would only have 2-3" of travel before it would hit. I can massage the outer wheelhouse some, but I don't know if I would get enough to make it worth it.
10-31-2024 #3
Registered User
- Join Date
- Mar 2005
- Posts
- 168
The 305/35r20 is super tight in there. I may try to roll the lip and see what that gains me.
The first one is about where I want it for rife height, and the second is about where it hits the lip. Not more than 2" of travel there.
Reply With Quote
