70 Mustang Ride Tech Coil over pre load adjustment

[builttodrive]

I am setting my ride height on my 70 mach 1 project and i'm starting to get it close but It's taking a lot more spring pre load on the drivers front and the passenger rear corner. I spoke with Ride tech on this and he said it's pretty typical that they are different for different weights on each corner. I kinda assumed that but I forgot to ask if there is such a thing as being too different from each other. My right rear is adjusted up more than an inch higher than the left and although I'm getting close it may still need a little more to get the car level. Although not as extreme the front drivers side is taking a considerable amount more than the passenger side also. It will probably be 3/4-1" different there also. Is that ok?