70 Mustang Ride Tech Coil over pre load adjustment

[builttodrive]

I would start again with all coilovers set the same. Love the front on jack stands and level the rear. Something just doesn’t sound right.

Don

I'll play with it some more. Ride tech did say it's very common that they are different from each other. I did say I was still tweaking it and some were 1/2"-3/4" different from each other and the guy I talked to at Ride Tech said that wasn't out of line. As I get closer it is more like an inch of more preload on the right rear. The car sits very square/level up on jack stands on level concrete and taking various measurements from the car to the ground it all looks good. The front of the car sat nearly identical with stock type coil springs. I always had more gap on the right front but at least with the coil over setup I should be able to level it out.