Results 1 to 14 of 14
Thread: Need some front geometry help...
Hybrid View
-
03-26-2020 #1
Registered User
- Join Date
- Feb 2013
- Location
- South Carolina
- Posts
- 935
And this continues to spiral...
Pitman and idler arms are different lengths (6" and 5.5"). I replaced everything with new parts a couple of years ago so its "correct" for the car. The center link is not parallel with either the frame or the ground. The best information I have is the factory assembly manual drawings, which clearly shows everything parallel but no dimensions. Could use some help with the consequences of squaring everything up. Here's the linkage from the top. String lines are parallel to the frame.
-
Reply With Quote
