Results 1 to 10 of 10
Hybrid View
-
03-09-2020 #1
Registered User
- Join Date
- Jan 2016
- Posts
- 121
Take a look at post #81 in my build thread. Had a local shop in Fargo, ND, Mike Bruns Radiator & Muffler, custom-fit and weld a Magnaflow stainless dual 3" system in our 66 Chevelle and it turned out awesome. Tight fit to get 3" to curve up over the rear axle tubes and miss the suspension, but it will fit with a skilled installer. Link https://www.pro-touring.com/threads/...82#post1320382
Chris Johnson
'66 Chevelle Malibu
-
03-11-2020 #2
Registered User
- Join Date
- Sep 2010
- Location
- Orange County, CA
- Posts
- 675
Heres how I did it on mine, it’s 3”.
03-15-2020 #3
Registered User
- Join Date
- Oct 2015
- Posts
- 362
This is how i did my 67. I like it because it pretty much disappears. I used a full MagnaFlow ful stainless and one of the 3 tailpipe options dumps it there.
My half a$$ed build thread.https://www.pro-touring.com/threads/...elle-6-0-4L60E
Tighten it till it strips & back it off a quarter turn.
Reply With Quote
