Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14

    Hybrid View

    1. #1
      Join Date
      Feb 2013
      Posts
      5
      Country Flag: United States
      Quote Originally Posted by c4racer2 View Post
      I think you are spot on in the bottom end is getting starved - too much oil on top end.



      Of course that doesn’t explain the pushrod failure does it?

      But 3 bearings and that cap cracking plus you can see discoloration that looks like was caused by heat to me. Seems oil not returning to the pan.

      And accusump ya ok fine but I’ve run sbc without them very hard track use in C4 and gen 3 camaros on race tires - two of them full on race cars - without such things and never had an oil problem. The Camaro has a stock pan too. On the C4 I ran a Canton pan and pickup and ran 315s square on that car.
      I’m all for giving yourself margin. But this really should not happen.

      Speaking of which did you verify pickup position in the pan ?

      Ya I agree on the accusump. Good protection but i initially didn’t think I needed it with my setup. Kinda chasing my tail now and will just have to see what the machine shop/ engine builder says. Either way I feel that the engine was not setup for HPDE track days, and can’t help but point at the pump.

      do you have any modifications to your block? Restrictions, smoothing oil galleys, etc?


    2. #2
      Join Date
      Oct 2018
      Location
      San Jose, CA
      Posts
      528
      Quote Originally Posted by BDM View Post
      Ya I agree on the accusump. Good protection but i initially didn’t think I needed it with my setup. Kinda chasing my tail now and will just have to see what the machine shop/ engine builder says. Either way I feel that the engine was not setup for HPDE track days, and can’t help but point at the pump.

      do you have any modifications to your block? Restrictions, smoothing oil galleys, etc?
      Probably. I have the block still. I can take a look !
      1971 Camaro - 406 / T56
      2016 Camaro SS convertible
      2018 Colorado 4x4




    Advertise on Pro-Touring.com