Results 1 to 14 of 14
Thread: LT1 rear disc problem
Threaded View
-
12-10-2005 #1
Registered User
- Join Date
- Jan 2005
- Location
- Johnstown
- Posts
- 99
LT1 rear disc problem
I started to do the conversion this morning on my malibu when I came across something. My malibu has a 12 bolt in it with 9" housing ends. Well when we built the rearend we put larger than stock ends on it for a bigger axle bearing. So now my lt1 brackets are not big enough for my axle to go through. So my question is has anybody else ran in to this and can they be machined to fit? The inside diameter is like 2.82" and they need to be 3.15". I don't see why they can't be machined. It looks like there is plenty of room. Any suggestions would be appreciated. Andy
-
Reply With Quote
