Rear roll center question

[dontlifttoshift]

and I thought Donny and I were on the same page. ?

We are. I just don't know how to answer Peter's question......technically.......so I was deferring to you. A large downside to RSRTs involvement in the forum was a lot of the "answer" people got ran off with the unwillingness to debate theory. Guys like exwestracer, jason rhodes, and norm peterson typically would have all chimed in on this. Everyone takes in information differently and reading it from different sources helps it make sense sometimes.

Here is everything I know about it. Rear roll center, low is good. With a panhard bar, it is very hard to get it too low. A watts link is better in every way save for cost, moving parts, and packaging. I prefer panhard bars, they are easy to build and package and the difference in handling, ASSUMING THE SAME RC HEIGHT, is minimal.....like measured in thousandths......on a timer system where the error is measured in thousandths.

[SSLance]

Guys like exwestracer, jason rhodes, and norm peterson typically would have all chimed in on this. Everyone takes in information differently and reading it from different sources helps it make sense sometimes.

Man, I talked with all 3 of those guys quite a bit early on about my car...an how to make it work. All very helpful...

Did they just disappear or move on to other pastures?